Insta Container Modification is excited to share with you our recently completed modification of a 20 ft shipping container into a shipping container office located inside our inventory warehouse!

We needed an office space that was onsite, secure, and fully functional. A shipping container was the perfect fit. It came together seamlessly including insulated walls, 2 hardwired wall heaters, internet and great lighting.

To complement our office we installed our 6062R INSTA Rhino Door for convenient access as well as our newest addition to our product line; the 6072 INSTA Aluminum Slat Roll Shutter. We built a tool closet at one end and incorporated the 6072 INSTA Aluminum Slat Roll Shutter to provide a very secure and space saving barrier.

We are constantly looking for ways to improve our level of service and believe this is another great step forward. Thank you for your continued business and for taking the time to share in our excitement.

 

 It just makes sense!

Increased ventilation could save you thousands of dollars, and even your life!

It’s no big secret that shipping containers are no longer used just for shipping product across the ocean. In fact, I would dare to say that there are not many times you won’t see a container storing something on your daily drive. They have become a great product to store just about anything you want to keep secure and dry, as well as modify to suit your exact needs.

There is one major flaw in using a shipping container for your everyday storage though. They are designed to be as air tight and water tight as possible. Some newer models have tiny vent holes that are less than an inch in size, but they need to be kept small to avoid water and moisture from getting inside during travel on the ocean. Making sure your container is air and water tight is great for ocean travel, but for storage use on land you’re putting your stored goods, and possibly even your life at risk by not venting your container.

 

Here are some major issues we see when containers are not adequately vented: read more…

Products ruined from moisture. Moisture build- up is one of the main problems when using a container for storage. If you live in a very humid climate we often see moisture build up on the inside of the roof on containers, sometimes to the point of it almost “raining” inside the container on top of stored goods causing water damage. Recently an Edmonton Alberta company had stored over $100,000 in electronics in a container for a few months, only to open it up and find just about all of it destroyed and not functioning properly due to moisture buildup in the container. By simply adding more ventilation this could have been prevented.

Another cause from moisture build up is what is being stored in the container. Many ski hills and winter sport facilities are now using shipping containers to store their skis and equipment. It all comes in wet with snow and stored in the container in and out all winter. Adding vents will help reduce the moisture in the air and help the melting snow evaporate faster, helping prolong the life of the container and anything stored inside.

Health risks from fumes, possible death. We have seen an increase of stories around North America of people passing out or even dying because of air poisoning from the fumes being built-up from paint, thinners, gas and other various chemicals that are stored inside shipping containers. While it may seem like a good idea to keep all these products locked up, storing them in a container with no way for the fumes to escape can be devastating.

Risk of fire or explosion. When storing chemicals, gas, propane, ATV’s or other recreational vehicles, fumes can build up in a container that is not vented properly. When fumes or gas build up in an air tight container it does not take much for disaster to strike. An example of this happened recently very close to our head office in Kelowna, British Columbia. You can read the news story of this unfortunate preventable accident here; http://www.castanet.net/news/Vernon/125432/Firefighter-s-death-an-accident.

Heat risks. Much like a car on a hot summer’s day, a shipping container can become sweltering hot under the heat of the sun. Heat in a container amplifies the risks to all the above factors mentioned. Adding vents to your container lowers the heat and helps reduce the risk of moisture and fumes building up.

Proper venting. When entering a container on a hot day you can clearly feel the air is warmer, but if you were to put a thermometer on the floor and one by the roof you will see the top is much warmer due to rising heat. The metal floor sitting on the ground creates its own shade actually helping to keep the bottom air cooler. Installing your vents near the top of the container will actually force the hot air out because of the pressure built-up from the hot air rising and with that helps pull the cooler air from the bottom up. It is also important to have more than one vent in a container to help create cross air flow. We usually suggest opposite corners. While a roof turbine vent may seem like a good idea, it can later lead to leaking issues, transport issues and not being able to stack the container in the future if needed. Also, they are easily damaged and will need to be replaced. Installing a side vent removes all the risks associated with a roof top vent.

By increasing your ventilation you will be creating a safer place to store your products and more importantly a saver environment to work in.

Insta Container Modifications wholesales shipping container modification parts and accessories designed to help make your container more secure, safer and easier to use. For more information on all their great products visit them at www.instacontainermodification.com or phone 1.866.647.4353

 

Celebrating 10 years of business in the container modification industry.

We are proud to announce a decade’s worth of thinking both inside and outside of the box for the container modification industry. That’s right, it’s our 10^th Anniversary!

Insta Container Modification is an independent, non-competing container parts and accessories supplier, developer, and proud charter member of the National Portable Storage Association (NPSA).  Established in 2005, Insta Container Modification has expanded its family-owned and operated business with you, our valued customer, at the forefront of every business decision. We pride ourselves on providing the best in customer service and only the highest quality products. We thank you, our customers and leaders in this industry, for your insight and vision that facilitates improvement in all areas and ensure continuous progress and growth in the years ahead.

The past decade has been an exciting, challenging, and rewarding adventure. We feel very fortunate to be an integral part of the tremendous growth and innovation these products offer and we continue to work on developing and designing new products.

Working with the most trusted engineers and listening to our dealers’ requirements and ideas over the past 10 years has made us the manufacturer of choice for shipping container modification parts and accessories.

How have we achieved this? Over the past 10 years our product offering has expanded in line with the needs of our customers, with priority on the design of all of our Insta Container Modification products to be easily installed either by you or your customer and ensuring they require no welding or painting.

Insta Shelf Bracket #3210
With its unmatched engineered lightweight design, our top selling Insta shelf bracket retains all the safety and strength you have come to expect while minimizing shipping weight thus further reducing landed cost to you.

Insta Lock Box #3240
A very specifically designed “wave” in the lock protector plate allows for easy lock access (even in the dark!) while still providing maximum protection from lock tampering, allowing you to rest easy knowing your contents are secure and safe.

Insta Divider Wall #6010
Do you require more versatility and/or need a way for increasing revenue from your storage containers? Just one set makes 2 containers out of 1 in less than 15 minutes! In fact, the Insta divider wall won us the “Best Innovation” award at the NPSA Convention hosted annually in Las Vegas and has become a “must have” for the Mini Storage Industry.

Insta Vent #6067
And what about the importance of container ventilation? Preventable issues ranging from monetary loss to much more serious events like fire or personal injury are all possibilities that can occur without proper ventilation. With its superior strength, airflow capability and ease of installation our Insta vent solves these serious issues and safety concerns.